Image of Structure Cycleworks SCW1 Janus Series
2020

Structure Cycleworks SCW1 Janus Series

Structure Cycleworks SCW1 2020

6995.00

Enduro

Colour / Blue & Black

Size / G1, G2, G3

Manufacturer Website

At a glance

The 2020 Structure Cycleworks SCW1 Janus Series is an Enduro Carbon mountain bike. It sports 27.5" wheels, is priced at $6,995 USD, comes in a range of sizes, including G1, G2, G3, has DVO suspension and a SRAM drivetrain. The bike is part of Structure Cycleworks's SCW1 range of mountain bikes.

The Structure Cycleworks SCW1 is a 27.5″ wheeled, full carbon, full suspension, enduro bike built on the most advanced mountain bike chassis in the world. The SCW1 has 150mm of travel at both front and rear. However, due to reduced brake dive – which leaves more suspension travel available for bump handling – the SCW1’s Without Telescoping Fork (WTF) linkage suspension system rides as though it has travel in excess of 180mm. The WTF front suspension platform solves performance issues inherent to all telescopic suspension forks. Stability – Head angle slackens throughout travel, with 40% less brake dive, increased trail, and nearly constant front-center early in suspension travel.

Sensitivity – The WTF linkage rotates on 30 mm cartridge bearings and isolates the shock from bending loads, allowing the system to move with minimal friction over bumps large and small with unprecedented control at the contact patch. Integrated Chassis – The SCW1 features matching leverage ratios and progressivity at the front and rear. Weight and strength are optimized by keeping hollow, carbon, double-crown fork and monocoque carbon control arms low and mounted to the strong core of the chassis. Size Specific Kinematics – Structure is one of the very few companies that adjusts the location of the shocks and pivots to keep all kinematic properties consistent between chassis sizes. Practicality – There are no special tools needed to adjust and service the SCW1. Using standard 30mm bearings, anyone who can service a rear shock can service the SCW1.

Where To Buy

Reviews

"The consistent geometry was noticeable right away under compression"

"Once I reached the descent I wasn’t sure what to expect, so mentally, I made a note to keep it dialed back a notch. I quickly tossed out that note once I picked up speed, though. Immediately, the SCW1 checked all the boxes I like in a traditional mountain bike. I felt confident. It was playful and easy to get in the air and throw into berms. It really seemed like the bike as a whole tracked better through turns and berms, maybe because my weight was more centered or because the front wheel stayed planted."

"The linkage suspension on the front of the SCW feels impossibly smooth throughout its travel"

"And it's not just at the top of the stroke where we think it matters, but throughout the entire range of travel. That's leverage at work, with a telescoping fork being one-to-one and this, much like your bike's rear-suspension, definitely not; the friction of the shock's seals seems close to non-existent. The sealed bearings help, of course, and the result is, as much as it irks me to say that Structure wasn't stretching the truth with their claim, a lot like the damn thing has an extra 20 or 30mm of travel. It's implausibly smooth and frictionless, delivering the sort of ground-tracking action that I doubt any telescoping fork could ever match, regardless of pricey clout-coatings and fancy seals."

Specifications

Frameset
  • Frame
    Carbon fiber, including fork and rear triangle
  • Fork
    DVO Topaz T3AIR, Trunnion, 205x65, WTF linkage
  • Shock
    DVO Topaz T3AIR, Trunnion, 205x65
Wheels
  • Hubs
    DT Swiss 350
  • Wheels
    M 1700 SPLINE® 35mm internal width, 27.5", alloy
  • Wheel Size
    27.5"
  • Tires
    Front: Maxxis Minion DHF 3C MaxxTerra EXO+ WT, 2.6"
    Rear: Maxxis Aggressor 3C, 2.5"
Drivetrain
  • Chain
    SRAM Eagle GX
  • Crank
    SRAM Eagle GX
  • Bottom Bracket
    SRAM DUB
  • Rear Derailleur
    SRAM Eagle GX
  • Shifters
    SRAM Eagle GX
Components
  • Brakeset
    Magura MT7 Pro
  • Handlebar
    Race Face Next R 35, 10mm rise, blk/gry
  • Saddle
    WTB Volt Pro
  • Seatpost
    OneUp, 150mm (G1), 180mm (G2), 210mm (G3)
  • Stem
    Race Face Atlas, 35mm or 50mm
  • Grips
    Race Face Half Nelson
  • Headset
    Cane Creek

FAQ

Q: How much is a 2020 Structure Cycleworks SCW1 Janus Series?

A 2020 Structure Cycleworks SCW1 Janus Series is typically priced around $6,995 USD when new. Be sure to shop around for the best price, and also look to the used market for a great deal.

Q: Where to buy a 2020 Structure Cycleworks SCW1 Janus Series?

The 2020 Structure Cycleworks SCW1 Janus Series may be purchased directly from Structure Cycleworks.

Q: What size wheels does the 2020 Structure Cycleworks SCW1 Janus Series have?

The 2020 Structure Cycleworks SCW1 Janus Series has 27.5" wheels.

Q: What size 2020 Structure Cycleworks SCW1 Janus Series should I get?

The 2020 Structure Cycleworks SCW1 Janus Series comes in sizes G1, G2, G3. After measuring your height, use the size chart below to find the typical Structure Cycleworks SCW1 Janus Series size for your height. Remember that these sizes are a general guide and bike sizes can vary between riders and bikes. The best way to find your size is to go for a test ride.

Rider Height (cm) Rider Height (in) Frame Size
148cm - 158cm 4'10" - 5'2" XS
158cm - 168cm 5'2" - 5'6" S
168cm - 178cm 5'6" - 5' 10" M
178cm - 185cm 5'10" - 6'1" L
185cm - 193cm 6'1" - 6'4" XL
193cm - 198cm 6'4" - 6'6" XXL

Discussion

0 Replies

No comments on this bike yet.

Leave a Reply

Your email address will not be published. Required fields are marked *

Deals View All

Recent Posts View All

Blackburn Honest Digital Pressure Gauge Review
Blackburn Honest Digital Pressure Gauge Review

It's 2020 people. The squeeze and bounce test doesn't cut it anymore (and this is…

Read More
Comparing Mountain Bikes
Comparing Mountain Bikes

Mountain Bikes are complicated machines. They have parts from hundreds of different manufacturers, come in…

Read More
Undomestic Mountain Bikes: Here’s what we know
Undomestic Mountain Bikes: Here’s what we know

Update March 2020: Undomestic has announced that they are manufacturing frames "at this moment" and…

Read More