Image of Specialized S-Works Stumpjumper 29/6Fattie
2018

Specialized S-Works Stumpjumper 29/6Fattie

Specialized S-Works Bikes 2018

All Mountain

At a glance

The 2018 Specialized S-Works Stumpjumper 29/6Fattie is an All Mountain Carbon mountain bike. It sports 29" wheels and a SRAM drivetrain. The bike is part of Specialized's S-Works Bikes range of mountain bikes.

- When only the best will do, you need the ultimate trail bike. In other words, you need the S-Works Stumpjumper 29/6Fattie. It reflects everything that we’ve learned over the years, and in our eyes, represents the pinnacle of trail performance. Starting at the carbon layup, it features our highest-end FACT 11m for an ultra-lightweight, strong, and stiff construction. The carbon moulding process also allowed us to revolutionise how you carry your trail essentials with the SWAT™ Door found at the down tube.

This compartment will fit a tube, a tool, and pump without rattling or compromising the structural integrity of the frame. Further improving the ride, you’ll also find an aggressive, trail-eating geometry that features ridiculously short chainstays, a roomy top tube, a low bottom bracket, a slacked out front end, and our proprietary Rx Trail Tune at the shock. And to make things even better, the Stumpy’s design also allows you the opportunity to toggle between 29-inch wheels and 6Fattie wheels (not included), allowing the ultimate in configuration options for the trail at hand. For the spec, we included a build that spares no expense and features a full SRAM XX1 Eagle groupset, SRAM Guide RS brakes, Öhlins front and rear suspension, and hand-built Roval Carbon wheels, so you get a bike that’s ready for anything on the trail.

Where To Buy

Reviews

Specifications

Frameset
  • Frame
    S-Works FACT 11m, full carbon chassis and rear end, 29/6Fattie Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, ManFu link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 135mm of travel
  • Fork
    Öhlins RXF 36, 29/6Fattie, Twin-Tube design, air spring w/ adjustable 3rd chamber, adjustable high and low speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 150mm of travel
  • Shock
    Custom Öhlins STX, Single-Tube design, Rx Trail Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 197x48mm
Wheels
  • Hubs
    Front: Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h
    Rear: Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
  • Wheels
    Roval Traverse SL 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built
  • Wheel Size
    29"
  • Spokes
    DT Swiss Revolution
  • Tires
    Front: Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"
    Rear: Purgatory, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"
Drivetrain
  • Chain
    SRAM XX1 Eagle, 12-speed w/ PowerLock
  • Crank
    SRAM XX1 Eagle, carbon, Boost™ 148, 170mm crankarm, 30mm spindle
  • Bottom Bracket
    SRAM PF30
  • Rear Derailleur
    SRAM XX1 Eagle™, 12-speed
  • Shifters
    SRAM XX1 Eagle, trigger, 12-speed
  • Cassette
    SRAM X01 Eagle, 12-speed, 10-50t
  • Pedals
    Specialized Platform, Cr-Mo, 9/16" spindle
Components
  • Brakeset
    Front: SRAM Guide RS carbon, hydraulic disc, organic pads, carbon lever, Guide S4 4-piston caliper, 200/180mm rotor
    Rear: SRAM Guide RS carbon, hydraulic disc, organic pads, carbon lever, Guide S4 4-piston caliper, 180/160mm rotor
  • Handlebar
    Specialized Trail, FACT carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 780mm, 31.8mm
  • Saddle
    Body Geometry Henge Expert, hollow Ti rails, 143mm
  • Seatpost
    Command Post IRcc, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm of travel
  • Stem
    Syntace F109, 6-degree rise, 31.8mm clamp

FAQ

Q: What size wheels does the 2018 Specialized S-Works Stumpjumper 29/6Fattie have?

The 2018 Specialized S-Works Stumpjumper 29/6Fattie has 29" wheels.

Q: What size 2018 Specialized S-Works Stumpjumper 29/6Fattie should I get?

After measuring your height, use the size chart below to find the typical Specialized S-Works Stumpjumper 29/6Fattie size for your height. Remember that these sizes are a general guide and bike sizes can vary between riders and bikes. The best way to find your size is to go for a test ride.

Rider Height (cm) Rider Height (in) Frame Size
148cm - 158cm 4'10" - 5'2" XS
158cm - 168cm 5'2" - 5'6" S
168cm - 178cm 5'6" - 5' 10" M
178cm - 185cm 5'10" - 6'1" L
185cm - 193cm 6'1" - 6'4" XL
193cm - 198cm 6'4" - 6'6" XXL

Discussion

0 Replies

No comments on this bike yet.

Leave a Reply

Your email address will not be published. Required fields are marked *

Deals View All

Recent Posts View All

Blackburn Honest Digital Pressure Gauge Review
Blackburn Honest Digital Pressure Gauge Review

It's 2020 people. The squeeze and bounce test doesn't cut it anymore (and this is…

Read More
Comparing Mountain Bikes
Comparing Mountain Bikes

Mountain Bikes are complicated machines. They have parts from hundreds of different manufacturers, come in…

Read More
Undomestic Mountain Bikes: Here’s what we know
Undomestic Mountain Bikes: Here’s what we know

Update March 2020: Undomestic has announced that they are manufacturing frames "at this moment" and…

Read More