At a glance
The 2018 Specialized Enduro Pro 29/6Fattie is a Enduro and Trail Carbon mountain bike. It sports 29" wheels, is priced at $9,800 AUD and a SRAM drivetrain. The bike is part of Specialized's Enduro range of mountain bikes.Big wheels have gotten somewhat of a bad rap as of late, but when paired with the correct geometry, they make for a pretty amazing experience. So, when all-out speed up, down, and all over the trail is what you’re after, the Enduro Pro 29/6Fattie will be waiting to answer the call. We gave it a geometry that features a slacker front end, a longer top tube, short chainstays, and a lower bottom bracket. All of this together makes the bike truly feel glued to the ground, and the platform is more responsive and capable then ever. We even added some bits, like integrated storage with a SWAT™ Door at the down tube, and made old new again by making a triumphant return to a threaded bottom bracket.
Where To Buy
Specialized
Specialized Enduro Pro 29/6FattieReviews
Specifications
Frameset
-
FrameFACT 11m, X-Wing layout, full carbon chassis and rear end, All Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, alloy link & adjustable shock extension, 12x148mm dropouts, replaceable derailleur hanger, 160mm of travel
-
ForkÖhlins RXF 36, 29/6Fattie, Single-Tube design, air spring w/ adjustable 3rd chamber, adjustable low-speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 160mm of travel
-
ShockCustom Öhlins STX, Single-Tube design, Rx All Mountain Tune, AUTOSAG, adjustable compression & rebound damping, 216x57mm
Wheels
-
HubsFront: Specialized, sealed cartridge bearings, 15x110mm spacing, 24h
Rear: DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h -
WheelsRoval Traverse Carbon 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built
-
Wheel Size29"
-
SpokesDT Swiss Revolution
-
TiresFront: Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"
Rear: Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"
Drivetrain
-
ChainSRAM X01 Eagle, 12-speed w/ PowerLock
-
CrankTruvativ Descendant, carbon, Boost™ 148, 170mm crankarm, 24mm spindle
-
Bottom BracketSRAM GXP, XR 73
-
Rear DerailleurSRAM X01 Eagle, 12-speed
-
ShiftersSRAM X01 Eagle, trigger, 12-speed
-
CassetteSRAM X01 Eagle, 12-speed, 10-50t
-
PedalsSpecialized Platform, Cr-Mo, 9/16" spindle
Components
-
BrakesetFront: SRAM Code R, 4-piston caliper, hydraulic disc, metallic pads, 200mm rotor
Rear: SRAM Code R, 4-piston caliper, hydraulic disc, metallic pads, 180mm rotor -
HandlebarSpecialized DH, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 800mm, 31.8mm clamp
-
SaddleBody Geometry Henge Comp, hollow Cr-Mo rails, 143mm
-
SeatpostCommand Post IRcc WU, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 34.9mm, 150mm of travel
-
StemSpecialized Trail, 3D forged alloy, 4-bolt, 6-degree rise
FAQ
Q: How much is a 2018 Specialized Enduro Pro 29/6Fattie?
A 2018 Specialized Enduro Pro 29/6Fattie is typically priced around $9,800 AUD when new. Be sure to shop around for the best price, and also look to the used market for a great deal.
Q: What size wheels does the 2018 Specialized Enduro Pro 29/6Fattie have?
The 2018 Specialized Enduro Pro 29/6Fattie has 29" wheels.
Q: What size 2018 Specialized Enduro Pro 29/6Fattie should I get?
After measuring your height, use the size chart below to find the typical Specialized Enduro Pro 29/6Fattie size for your height. Remember that these sizes are a general guide and bike sizes can vary between riders and bikes. The best way to find your size is to go for a test ride.
| Rider Height (cm) | Rider Height (in) | Frame Size |
|---|---|---|
| 148cm - 158cm | 4'10" - 5'2" | XS |
| 158cm - 168cm | 5'2" - 5'6" | S |
| 168cm - 178cm | 5'6" - 5' 10" | M |
| 178cm - 185cm | 5'10" - 6'1" | L |
| 185cm - 193cm | 6'1" - 6'4" | XL |
| 193cm - 198cm | 6'4" - 6'6" | XXL |
Discussion
0 RepliesWant more MTB in your mailbox?
The latest on mountain bikes delivered straight to your mailbox.
More Enduro Bikes View All
Nukeproof Reactor 290c Factory
4-bar Horst linkage suspension, Geometry adjustable between “Trail” and “Rail” modes via flip chip at rear shock mount, Internal cable routing, Weight given for size MD
Santa Cruz Bronson MX Carbon XT
Designed specifically for mixed wheels (except on size XS which is 27.5″ front and rear by design), VPP suspension design, Geometry adjustable via flip-chip in lower-link shock mount, Chainstay length…
Deals View All
Recent Posts View All
Blackburn Honest Digital Pressure Gauge Review
It's 2020 people. The squeeze and bounce test doesn't cut it anymore (and this is…
Read More
Comparing Mountain Bikes
Mountain Bikes are complicated machines. They have parts from hundreds of different manufacturers, come in…
Read More
Undomestic Mountain Bikes: Here’s what we know
Update March 2020: Undomestic has announced that they are manufacturing frames "at this moment" and…
Read More
Facebook
Twitter
Pinterest
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
No comments on this bike yet. Why not be the first?